Category Archives: ABV Technology

Soil Investigation

Soil Investigation is the process of establishing the type of soil strata at a specific area, by drilling holes into the earth to obtain samples. The samples obtained are then studied and verified by a team of experienced engineers. Soil investigation helps to provide information on soil parameters upon which design of subterranean structures such as piles and retaining walls can be carried out.

Project Reference

• Mandai Estate For Commercial Project
• Gul Road For A Commercial Project
• HDB Linkway Precinct Upgrading Project

Geotechnical Instrumentation

Construction activities in particular deep excavation, tunneling and pile driving in close proximity to existing structures can cause damage and endanger lives. Hence, it is imperative to conduct continuous monitoring and assessment of the impact of the construction activities on the surroundings.

Project Reference

• BCA ACADEMY
• Bedok Point Redevelopment
• A&A at Grand Hyatt Hotel

Lab Services – Geotechnical and Mechanical Material Testing (New addition)

Lab Services Pte Ltd. was set up to provide quality Civil and geotechnical Engineering testing services for construction-related activities. We have grown from strength-to-strength over the years and have emerged as an independent and preferred testing partner.We specialize in carrying out site and laboratory testing for materials such as Soil, Rock, Concrete & Grout – Jet-grout, Deep Cement Mix and Bentonite Mix samples. With our precedent years of experience and our SAC-SINGLAS accredited laboratory, we are committed to providing the utmost competent, reliable and quality test results for the Civil Engineering industry.

Project Reference

• Arc spark spectrometer for determining elemental composition of metals
• Cyclic direct simple shear test for determining dynamic shear properties of soil
• Odeometer for determining one dimention compressibility of soil
• Triaxial test for determining shear strength properties of soil
• Universal testing machine for determining tensile properties of steel reinforcement

Field Compaction & Strength Testing (with SAC-SINGLAS accreditation)

Nuclear Density Gauge Test
(In accordance with BS 1377: Part 9: 1990, Clause 3)
The Nuclear Density Gauge (NDG) Test is a quick and reliable method for measuring the in-situ density and moisture content of soils in compacted layers. It plays a vital role in verifying compaction quality for earthworks, roads, and foundations. With immediate results for bulk density, moisture content, and dry density, this test provides fast and effective on-site quality control and assurance.

Sand Replacement Test
(In accordance with BS 1377: Part 9: 1990, Clause 2.1)
This method determines the dry density of fine and medium-grained soils by excavating a small hole and measuring its volume with calibrated sand. Ideal for sites where the nuclear density gauge method is not suitable, offering reliable, non-radioactive compaction verification.

In-Situ California Bearing Ratio Test
(In accordance with BS 1377: Part 9: 1990, Clause 4.3)
The In-situ California Bearing Ratio test (in-situ CBR) measures the in-situ load-bearing capacity of subgrade soils by pushing a plunger into the ground. Essential for road pavement design, assessing soil strength to support traffic loadings.

Field Services

Field Services is paramount to determining the stability of a structure. Various testing methods such as the static pile load test, plate load test and the Pile Driving Analyzer (PDA) test (Using the patented PDA test frame method) are available. These tests help to determine the stability of a structure, based on ground settlement.

Project Reference

• Offshore Landfill Project, Pulau Semakau
• International Cruise Terminal, Marina Coastal Drive
• Pasir Panjang Terminal (Phase C6 – C10, P12 – P18)